Welcome: Photel Communication Technology Co., Ltd
Language: Chinese ∷  English

PT-60 SDH Serial Equipment

  • PT-60 1004 MSTP Integrated Service Transmission Equipment
PT-60 1004 MSTP Integrated Service Transmission Equipment

PT-60 1004 MSTP Integrated Service Transmission Equipment

  • Product description: PT-60 1004 is a new generation, enhanced SDH / MSTP device. It is a carrier-class, high compact platform and aimed for metro and SDH networks access. It can work as Add-Drop Multiplexer (ADM), Termina
  • INQUIRY

Brief Introduction

PT-60 1004 is a new generation, enhanced SDH / MSTP device. It is a carrier-class, high compact platform and aimed for metro and SDH networks access. It can work as Add-Drop Multiplexer (ADM), Termination Multiplexer (TM), and also as a Gigabit Ethernet to SDH converter.

PT-60 1004 with extremely strong cross-connection ability, it supports 64K up to low / high order of SDH cross-connection. Not only the STM-1 / STM-4 optical port can work as the network uplink, it can also configure the n x E1 ports as the network uplink simultaneously. The co-working optic and E1 network uplinks provides customer a very flexibly networking configuration.

Any combination of AC, DC dual power is supported, and equipped on a 1U height, 19 inches width rack mountable casing. Such powerful cross connect switch, flexible networking, link protection and redundancy power supply, various voice / data services which make PT-60 1016 the most function rich, reliable and cost effective solution for seamlessly migration of the E1 TDM network onto the SDH network.

Features


Ø 19” rack mountable, 1U height compact size

Ø System supports point-to-point, chain and ring network applications

Ø Reliable structure with 1 Master card, 1 power supply and 3 common slots for trunk and user cards

Ø Sophisticate configurable system protection with 1+1 MSP, SNCP network protection and 1+1 interface protection

Ø System supports 2 x STM-4, or 2 x STM-1 optical ports

Ø Ethernet supports 4 x GE electrical ports

Ø Data interface provides V35, FV35, RS232 for selection

Ø Analogue interface supports FXS, FXO, 4 wires E&M, MAG and HOT line

Ø Remote firmware and software upgrade is available;

Ø Redundancy power supply is supported with any combination of the power supply unit.

Specification

Ø  E1 Interface

Bit rate: 2.048Mbps ±50ppm

Code type: HDB3 code, G.703 standard

Input impedance: 75ohm or 120ohm

Frame structure: G.704, G.706

Jitter: G.742, G.823

Ø  Optical Interface

Bit rate: 155Mbps ±50ppm or 622 Mbps±50ppm

Output optical power: ≥-15dBm

Receiving sensitivity: ≤-35dBm

Optical wavelength: 1310nm/1550nm

Optical interface connecter: SFP/LC

Ø  Power Supply

Input voltage: -48Vdc or 220Vac

Voltage range: -36Vdc ~ -72Vdc, 176Vac ~ 264Vac

Power consumption: <50W

Ø  Ethernet Interface

Bit rate: 10/100/1000Mbps, half/full duplex auto

Standard: IEEE 802.3, IEEE 802.1Q (VLAN)

Connector: RJ45

Ø  Operation Environment

Working temperature: -10°C ~ 50°C

Working humidity: 5% ~ 95 % (non-condensed)

Storage temperature: -40°C ~ +80°C

Ø  Mechanical Structure

Dimension: 440mm x 260mm x 44mm

Net weight: 4Kg


PREVIOUS:GX3108G No next

CONTACT US

Tel: +86-25-84701010

Email: sales@photel.com.cn

Add: Room 601, building 11, No. 42, Xingang avenue, economic and technological development zone, Qixia district, Nanjing city,China,210038